Color: Order color
Packaging Unit: Medium – 25kg/Tong
Normal – 18L/Tong
Usage: Medium – Spray 0.8 to 1 kg/m2
Phase – 0.6 to 0.8 L/m2
Concrete face, cement mold, gypsum board, plywood, PC plate, ALC plate, CRC plate, etc., for finishing of all interior and exterior walls and remodeling of existing buildings
1) Specialization of apartments: for the replacement of internal and external stone materials such as apartment exterior (low floor), elevator hall, stairwell, corridor inner wall, piloti, etc.
2) Commercial facilities: Luxury cafes, hotels, condominiums, inside and outside entertainment establishments, etc.
3) Art facilities: Luxury exhibition halls, multi-purpose halls, galleries, and the interior and exterior of the concert hall.
· Various color expressions
· Texture of marble, granite, etc.
· Substitute various stone materials to produce a relatively low cost stone texture
1. The base surface to be constructed shall be a wall and shall not be constructed on a horizontal surface, etc., not a wall.
2. At construction and drying, the air temperature and wall temperature shall be between 5 and 35 CC and the air humidity shall be below 80%.
3. The weather conditions before and after work should be identified so that the product is not exposed due to rain, etc.
4. If any abnormalities are found in the work, the work should be stopped and the cause should be corrected.
5. Construction companies shall be fully trained by Baroko Korea Co., Ltd. and be fully aware of precautions.
6. Do not add any substance other than designated water or water.
7. Check if the production date (LOT) is the same before work, and in other cases, compare the color of the product and work if there is no problem.
8. After completion of the finishing work, the work surface shall be rain for at least 48 hours, weather conditions such as snow, and impact, etc